Product details

Set of Wad Punches

15-piece set in roll-up pouch

140 902 0

Hole diameter. 2–30 mm (in increments of 2 mm)
For stamping out or producing gaskets and seal rings from materials such as rubber, leather, felt, plastic, cork, fabric or similar components
Multi-layer wooden boards or polyamide boards should be used as a base impact support for stamping
Made from special tool steel, forged
Tool shape according to DIN 7200 A
Conical cutting head, polished and blank, slightly conical on the inside to remove stamped out material
Cutting edge sharpened, hardened and tempered
Black dip-coated
Black roll-up tool pouch made of hard-wearing polyester fabric with adjustable quick-release fasteners

Technical data

Product data sheet | PDF


	140 900 0	Set of Wad Punches
	140 901 0	Set of Wad Punches


140 002 0	Wad Punches	Hole dia. (Inch): 1/16 Inch Hole dia. (mm): 2 mm
140 004 0	Wad Punches	Hole dia. (Inch): 5/32 Inch Hole dia. (mm): 4 mm
140 006 0	Wad Punches	Hole dia. (Inch): 1/4 Inch Hole dia. (mm): 6 mm
140 008 0	Wad Punches	Hole dia. (Inch): 5/16 Inch Hole dia. (mm): 8 mm
140 010 0	Wad Punches	Hole dia. (Inch): 3/8 Inch Hole dia. (mm): 10 mm
140 012 0	Wad Punches	Hole dia. (Inch): 15/32 Inch Hole dia. (mm): 12 mm
140 014 0	Wad Punches	Hole dia. (Inch): 9/16 Inch Hole dia. (mm): 14 mm
140 016 0	Wad Punches	Hole dia. (Inch): 5/8 Inch Hole dia. (mm): 16 mm
140 018 0	Wad Punches	Hole dia. (Inch): 11/16 Inch Hole dia. (mm): 18 mm
140 020 0	Wad Punches	Hole dia. (Inch): 25/32 Inch Hole dia. (mm): 20 mm
140 022 0	Wad Punches	Hole dia. (Inch): 7/8 Inch Hole dia. (mm): 22 mm
140 024 0	Wad Punches	Hole dia. (Inch): 15/16 Inch Hole dia. (mm): 24 mm
140 026 0	Wad Punches	Hole dia. (mm): 26 mm
140 028 0	Wad Punches	Hole dia. (Inch): 1 1/8 Inch Hole dia. (mm): 28 mm
140 030 0	Wad Punches	Hole dia. (mm): 30 mm